Home » Products » Engineering Plastic Rods

Engineering Plastic Rods

06
PVDF is a crystalline fluorinated thermoplastic of very high purity which exhibits excellent chemical resistance to mineral and organic acids, hydrocarbons and solvents. It’s mechanical toughness, very low moisture absorption, wide range of service temperature from -40 °C to 150 °C, good wear resistance, low coefficient of friction, resistance to UV, self extinguishing nature and transparency to radiation renders it useful in host of applications in chemical processing, food, pharmaceutical and paper manufacturing.
01
PEEK is commonly specified for high temperature applications requiring combination of thermal, chemical and combustion properties. Electrical properties of POLYETHER ETHERKETONE are not influenced by limited moisture uptake under working conditions. As a result, POLYETHER ETHERKETONE exhibits excellent dimensional stability and dielectric properties. Filled grades of POLYETHER ETHERKETONE offer enhanced tribiological and other properties for demanding custom application.
Delrin Rods
close
Delrin Rods
07
Polyacetal (POM) extruded stock shapes available in POM H/POM C grades are part of a range of high performance engineering plastic products offered under trade name POLYMAT for machining into industrial components. These products are made using best raw material in modern production facility under strict quality control regime. The result is highly crystalline stress relieved products of consistent quality conforming to international standards. Polyacetal also known as Polyoxymethylene (POM) is crystalline thermoplastic with high tensile strength, stiffness, resiliency, low coefficient of friction and very low moisture absorption. This broad range of useful properties in addition to its ability to retain properties over a long period under elevated temperatures, mechanical stresses and demanding environmental conditions make it an engineering plastic of choice for many applications. Mechanical and Electrical properties of Polyacetal are not influenced by limited moisture uptake under working conditions. As a result, Polyacetal exhibits excellent dimensional stability and dielectric properties. These characteristics make Polyacetal preferred material over Nylons for metal replacement, precision mechanical components, under water components and components in sliding applications. It is non- toxic and can be used for food contact applications. Polyacetal is amenable to standard metal working machine tools and can be fabricated with ease to yield smooth surface finish. Information on technical properties for designers is provided on the back side. More specific data and engineering assistance is available upon request through our technical staff. ADVANTAGES: High Tensile Strength and Hardness Low Coefficient of Friction Excellent Dimensional Stability Good Resilience Non toxic Good Insulating Properties Excellent Machinability APPLICATIONS: Gears, Cams, Bearings Rollers, Sprockets Guide and Wear Profiles Insulating Components Parts for Food Contacts Parts for Humid Environment Underwater Components
10
Product Type : ROD
Plastic Type : Other
Plastic Molding Type : Extruding
Density : 1.32 g/cm3
Size : as per requirement
POLYACETAL ROD
close
POLYACETAL ROD
002
Polyacetal (POM) extruded stock shapes available in POM H/POM C grades are part of a range of high performance engineering plastic products offered under trade name POLYMAT for machining into industrial components. These products are made using best raw material in modern production facility under strict quality control regime. The result is highly crystalline stress relieved products of consistent quality conforming to international standards. Polyacetal also known as Polyoxymethylene (POM) is crystalline thermoplastic with high tensile strength, stiffness, resiliency, low coefficient of friction and very low moisture absorption. This broad range of useful properties in addition to its ability to retain properties over a long period under elevated temperatures, mechanical stresses and demanding environmental conditions make it an engineering plastic of choice for many applications. Mechanical and Electrical properties of Polyacetal are not influenced by limited moisture uptake under working conditions. As a result, Polyacetal exhibits excellent dimensional stability and dielectric properties. These characteristics make Polyacetal preferred material over Nylons for metal replacement, precision mechanical components, under water components and components in sliding applications. It is non- toxic and can be used for food contact applications. Polyacetal is amenable to standard metal working machine tools and can be fabricated with ease to yield smooth surface finish. Information on technical properties for designers is provided on the back side. More specific data and engineering assistance is available upon request through our technical staff. ADVANTAGES: High Tensile Strength and Hardness Low Coefficient of Friction Excellent Dimensional Stability Good Resilience Non toxic Good Insulating Properties Excellent Machinability APPLICATIONS: Gears, Cams, Bearings Rollers, Sprockets Guide and Wear Profiles Insulating Components Parts for Food Contacts Parts for Humid Environment Underwater Components
08
Nylon Rod is a type of synthetic engineered thermoplastic which is used for making components with excellent wear & abrasion resistance, stability at high & low temperatures, and having low coefficient of friction. It is also appreciated for being light in weight and possessing superior structural strength. This rod is also known to assure quiet operation of assemblies they will be fabricated in with long service life. Nylon Rod offered by us has melting point range of 190 to 350 degrees Celsius with low density of 1.15 g/cm3.